Table of Contents
Advertisement
Figure 84. Installing optional IDSDM/vFlash module
Next steps
1
Install the MicroSD
cards.
NOTE:
Reinstall the MicroSD cards into the same slots based on the labels you had marked on the cards during removal.
2
Follow the procedure listed in
Backplane
Backplane connectors
Depending on the configuration, your system supports one of the following:
•
8 x 3.5 inch SAS/SATA backplane
•
18 x 3.5 inch SAS/SATA backplane
•
8 x 2.5 inch Dell PowerEdge Express Flash (NVMe) backplane
•
16 x 2.5 inch SAS/SATA backplane with the optional additional backplanes below:
– 8 x 2.5 inch NVMe backplane
– 16 x 2.5 inch SAS/SATA backplane (FlexBay)
•
32 x 2.5 inch SAS/SATA backplane
136
Installing and removing system components
After working inside your
system.
Advertisement
Table of Contents
