Quick Troubleshooting; The Computer Is Unable To Start Up - HP Compaq 2710p Getting Started

Hp compaq 2710p: quick start
Hide thumbs Also See for Compaq 2710p:
Table of Contents

Advertisement

Quick troubleshooting

The computer is unable to start up

When the computer is turned on, the power light turns on. If the computer
and the power light are not turned on when you slide the power switch,
adequate power may not be available to the computer.
The following suggestions may help you determine why the computer will
not start up:
If the computer is plugged into an AC outlet, be sure that the AC outlet
is providing adequate power by plugging another electrical device into
the outlet.
If the power light on the front of the computer is blinking rapidly, replace
the AC adapter with one having a higher power rating.
NOTE:
approved for this computer.
If the computer is running on battery power or is plugged into an
external power source other than an AC outlet, plug the computer into
an AC outlet using the AC adapter. Be sure that the power cord and
AC adapter connections are secure.
If the computer is running on battery power, try the following
procedures in the sequence provided, until startup occurs:
If the battery light on the front of the computer is blinking, the
battery has reached a low battery level, which may not allow the
computer to start up. Plug the computer into an AC outlet using
the AC adapter, start the computer, and allow the battery to
charge.
Remove the primary battery and optional accessory battery (if
applicable) and plug the computer into an AC outlet using the AC
adapter. If you can turn the computer on, one of the batteries may
need to be replaced.
28
Chapter 5 Troubleshooting
Use only the AC adapter provided with this computer or one

Advertisement

Table of Contents
loading

This manual is also suitable for:

2710p

Table of Contents