Removal steps of the LCD bezel assembly (for models with only conventional camera)
When installing:
• Install a new LCD bezel assembly whenever the old one is removed.
• Ensure that all the latches are attached firmly.
2020 LCD panel
Note: Before you start the servicing, disable the built-in battery. See "Disabling the built-in battery" on page
62.
For access, remove these FRUs in order:
• "1010 Removable battery" on page 62
• "1020 Nano-SIM card" on page 63
• "1030 Base cover assembly" on page 63
• "2010 LCD bezel assembly" on page 88
Removal steps of the LCD panel
.
89
Chapter 9
Removing or replacing a FRU