Advertisement
Quick Links
WT287
Cat No.
Assembly Instructions - Please keep for future reference
Malaga Swing
No. People
Assembly Time
60 - 90
Minutes
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the JDW customer helpline: 0871 231 2000
Advertisement
Summary of Contents for N Brown Group WT287
- Page 1 WT287 Cat No. Assembly Instructions - Please keep for future reference Malaga Swing No. People Assembly Time 60 - 90 Minutes Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the JDW customer helpline: 0871 231 2000...
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the • Make sure you have • We do not recommend the components and tools enough space to lay out use of power listed on the next pages.
-
Page 3: Exploded View
Exploded View... - Page 4 Components - Panels Please check that you have all the components listed below before constructing your item. Part No Description...
-
Page 5: Components - Fixings
Components - Fixings Please check that you have all the components listed below before constructing your item. M6x30mm M8x40mm M6x46mm M8x60mm M8x68mm M6x68mm M6x86mm M6x50mm Ruler - Use this to measure your screws (mm) - Page 6 Assembly Instructions Note: All Bolt Head Caps and Nut Caps should not be attached before finally tightening all Bolts with the Allen Key. Only tighten all bolts when you are satisfied with the alignment of all components. Step 1 • Connect the top connection tube (Part C and Part D), fasten them by...
- Page 7 Step 3 • Connect the rear tube (Part E) with the leg tube (Part A and Part B), fasten them by bolts (Part X), nuts (Part V) and washers (Part W). Put the plastic cap(Part Z) on the bolts. Step 4 •...
- Page 8 Step 5 • Connect the leg tube with back connection tube (Part F and Part G), fasten them by bolts (Part T), nuts (Part V) and washers (Part W). Put the plastic cap(Part Z) on the bolts. Step 6 • Connect the seat part(Part J) with the armrest part (Part I) and safety...
- Page 9 Step 7 • Connect the hanging tube (Part E1) with the front of armrest part (Part I), fasten them by bolts(Part P),nuts (Part V1) and washers(Part W1). • Connect the hanging tube (Part E1) with the back of armrest part (Part I), fasten them by bolts(Part S),nuts (Part V1) and...
- Page 10 Step 9 • Put the other end of the spring hook (Part H) into the metal plate of the top connection tube(Part C and Part D). Step 10 • Connect the roof tube (Part K) with the top connection tube (Part C and Part D), fasten them by screw (Part Y).
- Page 11 Step 11 • Connect the roof part (Part M) with the roof tube (Part L). Step 12 • Connect the roof tube. CARE AND CLEANING: 1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS OR FRAME PARTS. 2.
- Page 12 Manchester M60 6ES...