Basic adjustment
E
Manual adjust
Configure various settings for each service using the
colour (R/G/B) buttons.
Service
Service
no.
name
Lock
CH skip
Press a/b to select the desired service.
1
2
Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
The ✔ mark indicates the operation is set to on. Each
•
time the colour button is pressed, you can switch the
corresponding operation on/off.
Buttons for "Manual adjust" operation
Lock
Press R button.
When the service is locked, you must enter your
PIN whenever you tune to the service.
CH skip
Press G button.
Services with a ✔ mark are passed over when
pressing :r/s on the TV or remote control unit.
Sort
Press B button.
The item position of services can be sorted.
Press a/b to select the service whose
1
item position you want to move, and then
press ;.
Press a/b to move it to the desired
2
position, and then press ;.
3
Repeat steps 1 and 2 until all desired
service items are sorted.
28
Lock
CH skip
Old LCN
Sort
Cable setting
E
Additional search
Use this menu to add new services automatically after
"Digital search" in the "Auto installation" menu has been
completed. Follow steps 1 to 4 in Searching for
cable broadcasts on page 10.
E
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen, the TV
starts searching.
•
Refer to the table about menu items in the right column
on page 10.
Frequency
QAM modulation
Symbol rate
Search start
E
Manual adjust
This function is the same as in "Digital setting". Refer to
"Manual adjust" in "Digital setting".
H
•
You can only reconfigure the "Manual adjust" settings.
•
You can only set the "Lock" setting in "Manual adjust".
MHz