Table of Contents
Advertisement
TUNING THE TV FOR THE FIRST TIME
Before switching on the TV, put your decoder and media recorder
to Standby if they are connected and ensure the antenna is
connected. Tosetup the TV use the buttons on the remote control
as detailed on page.
1
This screen will appear the first time that the TV is switched on and
ezch time the TV is reset.
2
Language include the "English", "Françals" and "
3
to select the state in which you live. State include the NSW/
ACT(New South Wales/Australian Capital Territory). VIC(Victoria),
OLD(Queensland), SA(South Australia), WA(Westem Australia),
TAS(Tasmania) and NT(Northern Territory).
4
Press
to setup "Energy Saving Mode".
5
Notes:
•
To ensure your television is operating at optimal energy
efficiency, select ECO mode during initial activation. ECO mode is
recommended for normal home use.
•
Energy Saving Mode: The factory default settings of this television
meet ENERGY SAVING requirements. Changing Picture Settings
may increase energy consumption, possibly beyond the limits
required for ENERGY SAVING qualification.
•
To return to ECO mode settings, select Standard picture mode.
•
Standard picture mode is used to achieve published average
power values, and this mode is recommended for normal home
use.
6
Press
to set "Energy Saving Mode" and to start ATV/DTV Scan.
The Auto Scan screen will appear and the TV will automatically
start to search for available stations. The progress bar will
move along the line.
7
When DTV search is completed, the TV will automatically turn to
the lowest logical channel number.
MENU OPERATION (TV/AV mode)
".
Initial Installation
Menu Language
English
Country/Region
Australia
Province/State
NSW/ACT
Star TV Scan
Cancel
OK
BACK
TV Auto Scan
ATV Channels:0
10%
VL
21
Advertisement
Table of Contents
