Alcatel LINKHUB HH71V1 User Manual page 8

Power button
• Once connected to a power outlet, your Cat7 Router will automatically
power on.
• To power off your device, press and hold the power button for 3 seconds.
• To power on your device, press and hold the power button for 1 second.
WPS button
To enable WPS, press and hold the WPS button for 3 seconds. The Wi-Fi LED
will start to flash blue. Then press the WPS button on the device you wish to
connect to within two minutes. Your Cat7 Router will automatically assign your
network settings to the device you wish to connect to.
Reset.button
Use a paperclip or blunt pin to gently press and hold the reset button for 3
seconds. All LEDs will turn on, then off, and finally turn on again once the reset
is completed. You can also reset the device via the Web-UI.
LED description
Icon Description
•
•
•
•
•
WPS button
Antenna port
TEL port
LAN / WAN port
Power connector
Solid blue: The device is powered on.
Off: The device is powered off.
Solid blue: WiFi is enabled.
Flashing blue: WPS connection is available.
Off: WiFi is disabled.
6