1.3 Your wireless router
LAN 1~4 LED
Off: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
WAN (Internet) LED
Red: No IP or no physical connection.
On: Has physical connection to a wide area network (WAN).
5GHz LED
Off: No 5GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
2.4GHz LED
Off: No 2.4GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
Power LED
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
Power (DCIN) port
Insert the bundled AC adapter into this port and connect your router to a power source.
Reset button
This button resets or restores the system to its factory default settings.
WPS button
This button launches the WPS Wizard.
Power switch
Press this switch to power on or off the system.
7