Using Your Dryer - Whirlpool WGD7120HC Quick Reference Manual

WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
1
CLEAN LINT SCREEN
Clean the lint screen before each load.
Also, clean the exhaust vent at least
every 2 years.
5
SELECT HOW TO
DRY
If you unintentionally select wrong language during digital un-boxing and/or you want to get back to Factory settings then perform Factory
Reset.
FACTORY RESET
Press/hold both Temp and Wrinkle Shield™ keys until display count-down has completed. Unit will power back on with "Select Language"
display message.
NOTE: Government energy certifications for this model were based on the Regular + Normal Cycle, Highest temperature setting, Normal
Dryness Level, EcoBoost™On. The as-shipped defaults were the same as the Government Energy Certification Settings except the default
Temperature Setting of Medium was adjusted to the Highest temperature setting.
Cycles that are available for post-sale download may use more energy than the Normal cycle, upon which the energy use rating of this dryer is
based.
*NOTE: See "Cycle Guide" for more information about cycles, settings, and options. Not all cycles, settings, and options are available with all
models. Read all your Manuals for more information on your unit.
4

USING YOUR DRYER

2
LOAD DRYER
6
ADJUST CYCLE
SETTINGS, IF
DESIRED*
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
3
PRESS POWER
TO TURN ON
THE DRYER
7
SELECT ANY
ADDITIONAL
OPTIONS*
4
SELECT WHAT
TO DRY
8
TOUCH AND HOLD
START/PAUSE TO
BEGIN CYCLE