Pyle PBMSPG198 User Manual

WARNING:
1. DO NOT place objects on top of the device, as objects
may scratch the device.
2. DO NOT expose the device to dirty or dusty environments.
3. DO NOT insert any foreign objects into the device
4. DO NOT expose the device to strong magnetic or
electrical field
5. DO NOT use the device in the rain.
6. Please check with your Local Authority or retailer for
proper disposal of electronic products.
7. DO NOT disassemble the device. Only a certified service
technician should perform repair.
8. The device has apertures to disperse heat.
DO NOT block the device ventilation,the device may
become hot and malfunction as a result.
• Illegal operation may cause personal injury,which could be fatal.
• Illegal operation may cause damage to property.
FEATURES
This system includes one microphone and can be used with personal
computers, mobile phone, DVD, VCD, CD, LD, TV, MP3, radio, electronic
piano and any devices which have audio output. Amplifier circuit are using
high-performance, high-fidelity design, coupled with high-quality
professional speaker, in order to make the sound fleld to get positioned so
clear, distinct levels effect.
The sound system is outstanding, with deep and powerful bass and the
treble effect is strong,with clear and bright pitch.
The professional electronic frequency division circuit enhances the
machine's crossover point effect.
Using professional design and manufacture of high-capacity batteries, and
dedicated audio power capacitors, to make the speaker's power reserve
margin larger, more stable, better dynamics, higher signal to noise ratio.
PBMSPG198
Street Blaster Wireless BT Streaming
Boom Box Speaker system
Wireless & Portable Stereo Speaker
with Built-in LED Lights (600 Watt)
Troubleshooting
Fault Possible Cause
1. No input sound source
No sound
2. Volume is too low
Distortion 1. Volume too high
of sound 2. Speaker may be damaged
1. Microphone plug is not fully
inserted.
Karaoke
2. Microphone switch is not on
does not 3. Microphone volume knob is
at the lowest position
work
4. Wireless microphone has low
battery
1. The song format in the U disc is
incorrect
MP3 does
2. Improper operation has caused
not play
a process disorder
3. USB disc is disconnected
Main Technical Specification
Peak Power ................................................................................................................... 600W
Input Sensitivity ....................................................................................................... 200mV
Frequency Response .................................................................................... 45-1 60KHz
Power Supply ................................................................ AC100V- AC240V, 60Hz/50Hz
* Above specifications are the specifications of the sampling machine and
are for reference purpose only.
* Due to continuous product development ,specifications may be subject to
change without prior notification.
PACKAGE CONTAINS
• 1x Remote Control
• 1x Power Adapter
• 1xWarranty Card
• 1x Carrying Belt
• 1x User Manual
• 1xWired Microphone
• 1x FM Antenna
Solution
1. Use a better music signal
2. Adjust volume
1. Turn down the volume
2. Repair or replace it
1. Plug microphone properly
into the socket
2. Turn on microphone switch
3. Adjust microphone volume
properly
4. Replace battery
1. Transform song format into
Mp3 format
2. Reboot the machine