Station Selector Switch (For Dual Station); Power Trim/Tilt (Ptt) Switch - Yamaha 6X9 DIGITAL ELECTRONIC CONTROL Operation Manual

How to release
1. When the remote control levers are oper-
ated, the beep sounds and the LED turn
off.
1
4
UP
1. Speed control switch
2. Speed UP switch
3. Speed DN switch
4. LED
Station selector switch (for dual
station)
Press the "STATION" switch allows you to
switch the station that can do operations.
How to select
1. Put the main station helm and the 2nd
station helm remote control levers in the
N position.
2. Press the "STATION" switch you want to
enable, and the LED turns on.
2
3
DN
41

Station selector switch (for dual station)

3. You can do operations from the station
that you enabled.
TIP:
• The disabled station can only start and stop
the engines.
• The station selector switch flashes 3 times
if the station selection fails.
B
A
B
A
1. Station selector switch
2. LED
A. Main station helm
B. 2nd station helm

Power trim/tilt (PTT) switch

The PTT switch can adjust the angle of the
outboard motors in relation to the transom.
Pressing the "UP" switch moves the outboard
motors upward from the trim range to the tilt
range. Pressing the "DN" switch moves the
outboard motors downward from the tilt range
to the trim range.
2 1