Table of Contents
Advertisement
SECTION 3 ADJUSTMENTS
5.1.2.Step 2
Install the tool "Docklight". Register number: 01 01 24210355766,Select the COM Port of debug tool and Setup the
software, Press "Run" to Start Communication.
5.1.3.Step 3
The RS232 Line is shown as the picture, Insert the 3.5MM-Audio-Plug to the Earphone-JACK(RS232 port) of Main
board,Connect the DB-9 interface to your Control center.
ADJ-11
Advertisement
Chapters
Table of Contents
Troubleshooting
