Sätta tillbaka processorfläkten
VARNING: Innan du utför något arbete inuti datorn ska du läsa
säkerhetsinstruktionerna som medföljde datorn och följa stegen i
utför något arbete inuti
anvisningarna i
metoder för säkert handhavande finns på hemsidan för regelefterlevnad på
www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the processor fan with the screw holes on the heat
sink.
2
Replace the four screws (M6xL10) that secure the processor fan to the heat
sink.
3
Connect the processor-fan cable to the system board.
4
Rotate the side-chassis towards the computer until it snaps into place.
Post-requisites
1
Replace the
front
2
Replace the
computer
60
datorn. När du har arbetat inuti datorn följer du
När du har arbetat inuti
bezel.
cover.
datorn. Mer information om bästa
Innan du