Table of Contents
Advertisement
Removing the rechargeable battery
Please note that this process is not reversible.
1
To deplete the battery, repeatedly press the activation button until
the AirFloss no longer produces any bursts of air (Fig. 22).
2
Remove the nozzle from the handle. (Fig. 23)
3
Firmly grab the handle with one hand at the top and one hand on
the bottom (Fig. 24).
4
Snap the handle into two parts. (Fig. 25)
Note: This step requires a good amount of physical force. The top and bottom
half of the handle should be separated once you snap the handle.
5
Remove the bottom half of the handle (Fig. 26).
6
Cut all 6 wires on the internal component with scissors (Fig. 27).
7
Completely pull apart the internal component from the top part of
the handle (Fig. 28).
8
The battery is located inside the top half of the handle. Remove the
battery and dispose of it properly (not in household waste) (Fig. 29).
Warranty and support
Philips warrants its products for two years after the date of purchase.
Defects due to faulty materials and workmanship will be replaced at
Philips expense provided that convincing proof of purchase in the
qualifying period is provided. Use of unauthorized replacement parts will
void this warranty.
Contact our Consumer Care Center at 1-800-682-7664
(North America), outside North America contact your local
Philips Consumer Care Center.
Internet information: www.sonicare.com (North America)
or www.philips.com/support (outside North America).
ENGLISH
13
Advertisement
Table of Contents
