Honeywell ScanPal EDA51K Series User Manual page 18

Install the Battery
Note: For battery replacement, refer to
1. Insert the battery. Slide the connector end in first and then press the battery
2. Attach battery cover.
3. Slide the lock into the locked position while applying light pressure to the
4. Attach the hand strap, if applicable.
5. Press the Power button (approximately 3 secs) to turn on the computer.
EDA51K User Guide
down.
1
battery door near the lock.
2.1
Battery Part Numbers
2.2
(see page 5).
3
7