Standard Signal Mode Table - Samsung S24C450DW User Manual

10
Specifications

10.3 Standard Signal Mode Table

This product can be set to only one resolution for each screen size to obtain the optimum picture

quality due to the nature of the panel. Therefore, a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for the screen size of your product.
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.

If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT
monitor before you exchange it with the LCD monitor.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
S24C450DW
Resolution
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1280 x 720
VESA, 1280 x 800
VESA, 1280 x 1024
VESA, 1440 x 900
VESA, 1600 x 900
VESA, 1680 x 1050
VESA, 1920 x 1080
VESA, 1920 x 1200
Horizontal Vertical
Frequency Frequency
(kHz) (Hz)
31.469 59.940
35.156 56.250
37.879 60.317
48.363 60.004
45.000 60.000
49.702 59.810
63.981 60.020
55.935 59.887
60.000 60.000
65.290 59.954
67.500 60.000
74.038 59.950
Pixel Clock Sync Polarity
(MHz) (H/V)
25.175 -/-
36.000 +/+
40.000 +/+
65.000 -/-
74.250 +/+
83.500 -/+
108.000 +/+
106.500 -/+
108.000 +/+
146.250 -/+
148.500 +/+
154.000 +/-
10 Specifications
83