Acer XZ321QU User Manual page 25

3. Toggle to the left or right to adjust the sliding scales.
4. Language: Set the OSD menu language.
5. OSD timeout: Adjust the delay before turning off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency
can be 0% (OFF), 20%, 40%, 60%, or 80%.
7. Refresh rate num: Display the panel's current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note: If FreeSync set "On" you can see the V Frequency to changes in the OSD.
System
Mode - Standard
Picture Input
Color
Auto Source
Audio
DP Format
Gaming
Wide Mode
OSD PIP/PBP
Hot Key Assignment
System
DDC/CI
HDMI Black level
Move Enter
Mode - Standard
Picture
Quick Start Mode
Color
Power-off
USB Charge
Audio
Gaming
OSD
System
Move
Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Input: Select the source from DP In, Mini DP, HDMI 2.0 or HDMI(MHL2.1).
5. Auto Source:The default is "On", can support auto search for signal source in order.
-----------------------------------------------------------------------------------------------------------
Note: Surround application must set Auto Source is "Off".
6. DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format.
7. Wide mode: You can select which screen aspect you are using. The options are Full,
Aspect, and 1:1.
8. PIP/PBP settings
HDMI 2.0
Off
DP 1.2
Full
X
On
Normal
Off
Off
X