Dukane 6710UL User Manual page 169

ALERT MAIL
ALERT MAIL
HOST NAME
DOMAIN NAME
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS 1,
RECIPIENT'S ADDRESS 2,
RECIPIENT'S ADDRESS 3
TEST MAIL
This option will notify your computer of error messages via e-mail when
using wireless or wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
Subject: [Projector] Projector Information
THE COOLING FAN HAS STOPPED.
[INFORMATION]
PROJECTOR NAME: xxxxx
LIGHT HOURS USED: xxxx[H]
Type in a host name.
Type in a domain name of the network connected to the projector.
Specify the sender's address.
Type in the SMTP server name to be connected to the projector.
Type in your recipient's address.
Send a test mail to check if your settings are correct.
NOTE:
• If you entered an incorrect address in a test, you may not receive an Alert
mail. Should this happen, check if the Recipient's Address is correctly
set.
• Unless any one of the [SENDER'S ADDRESS], [SMTP SERVER'S NAME] or
[RECIPIENT'S ADDRESS 1-3] is selected, [TEST MAIL] is not available.
• Be sure to highlight [OK] and press the ENTER button before executing
[TEST MAIL].
145
5. Using On-Screen Menu
—
Up to 16 alphanumeric
characters
Up to 60 alphanumeric
characters
Up to 60 alphanumeric
characters and symbols
Up to 60 alphanumeric
characters
Up to 60 alphanumeric
characters and symbols
—