Rear Dinette To Double Bed (190-Versatile Model); Dinette Table Storage - Roadtrek CHEVROLET 170 Owner's Manual

REAR DINETTE TO DOUBLE BED (190-Versatile Model):

To convert the dinette into a double bed.
1. Remove table leg and store, (see Picture B-P4).
2. Place the table in centre, (see Picture B-P18).
3. Place both back rests in the centre in a tepee
position, (see Picture B-P19).
4. Push down on the top of the cushion "tepee"
until they lay flat, (see Picture B-P20).
Picture B-P19: Arrange cushions like a tepee

DINETTE TABLE STORAGE

Remove the table leg and store.
Note: The dinette table leg is stored behind the rear closet
door, (see Picture B-P4 on page B-2).
1. The dining table is stored under the driver's side
rear cushion, (see Picture B-P21).
D D o o c c N N o o : : 21906503 R R e e v v : : 02
Picture B-P17: Rear dinette
living setup.
Copyright © Hanmar Motor Corporation 2005
Picture B-P18: Placement of table top for bed.
Picture B-P20: Lay cushions flat.
Picture B-P21: Dining table storage.
DAILY LIVING
B B - - 6 6