Download Print this page
Lorex LW4211-W Quick Start Manual

Lorex LW4211-W Quick Start Manual

Mpx wireless security camera

Advertisement

Quick Links

Package Contents
• 1080p MPX Wireless
• Power Adapters (×2)*
Security Camera
• Mounting Kits (×2)*
• Wireless Receiver
• Allen Key
• Antennas (×2)*
• BNC Adapter
* One each for camera and receiver.
ATTENTION:
A REGULATED UL / CSA APPROVED power supply is REQUIRED for use
with this camera (included). Use of a non-regulated, non-conforming
power supply can damage this product and voids the warranty.
Safety Precautions
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity and voltage levels
noted in the camera's specifications.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of
intense light.
• Use only the supplied regulated power supply provided with the
product. Use of a non-regulated, non-conforming power supply can
damage the product and void the warranty.
• Periodic cleaning may be required. Use a damp cloth only. Do not use
any harsh, chemical-based cleaners.
Installation Tips
To ensure the best possible wireless performance, it is
recommended to keep the following installation tips in mind
when choosing a location for the camera:
• Ensure your camera is placed as close to your receiver as possible.
• Reduce the number of obstructive materials between the camera and
the receiver. Concrete, brick, metal and wood are the most common
materials in your house that can cause poor signal strength.
• The camera uses the 2.4GHz band exclusively. Most new routers
support both 2.4GHz and 5GHz bands. It is recommended to use other
WiFi-connected devices using the 5GHz band when possible to ensure
the 2.4GHz band is not overcrowded.
• Other electronic devices such as microwaves, TVs, cordless phones,
and baby monitors can cause signal interference. It is recommended to
install the camera as far away from these devices as possible.
• Point the camera where there is the least amount of obstructions (i.e.,
tree branches).
• Install the camera where vandals cannot easily reach.
• This camera is rated for outdoor use. Installation in a sheltered location
is recommended.
LW4211_QSG_EN_R1.indd 1
Resources
Need Help?
Visit us online for
up-to-date software and
complete instruction
manuals
1
Visit lorex.com
Search for the model number
2
of your product
Click on your product in the
3
search results
4
Click on the Downloads tab
Dimensions
6.1" / 155mm
Disclaimers
lorex.com/compatibility
• For a full list of compatible recorders, visit
• Not intended for submersion in water.
• This camera includes an Auto Mechanical IR Cut Filter. When the
camera changes between Day/Night viewing modes, an audible clicking
noise may be heard from the camera. This clicking is normal, and
indicates that the camera filter is working.
Copyright © 2018 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right
to modify product design, specifications and prices, without notice and without
incurring any obligation. E&OE. All rights reserved.
1080p MPX Wireless Security Camera
Quick Start Guide
English Version 1.0
4.4" / 113mm
LW4211_QSG_EN_R1
LW4211 SERIES
www.lorex.com
10/10/2018 3:48:50 PM

Advertisement

loading

Summary of Contents for Lorex LW4211-W

  • Page 1 • This camera is rated for outdoor use. Installation in a sheltered location is recommended. Copyright © 2018 Lorex Corporation As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without www.lorex.com incurring any obligation.
  • Page 2 Female Power notch on the base. This will keep the camera Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability for use of its products that does not conform with local laws. base flush to the surface when mounted.
  • Page 3 Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and ( 2) this device must accept any interference received, including interference that may cause undesired operation.

This manual is also suitable for:

Lw4211 series