SUPERSERVER 2028TP-HTR/HTTR/HTFR USER'S MANUAL
9. Connect the cables between the serverboard, backplane, chassis, front panel,
and power supply, as needed. Also, fans may be temporarily removed to
allow access to the backplane ports.
10. Replace the expansion card bracket and secure the bracket with a screw.
11. Repeat steps 3 - 5 for the remaining nodes.
12. Connect the AC power cord and power up the system.
Figure 6-10. Removing Serverboard Node Drawer
Note: figure is for illustrative purposes only, the serverboard shown may differ from
those used in the 2028TP-HTR/HTTR/HTFR.
6-12