Table of Contents
Advertisement
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Always keep the adapter dry. Never rinse it under the tap or immerse it
in water.
Note: Make sure the appliance is switched off and unplugged before you start
to clean it.
If necessary, clean the adapter with the cleaning brush or a dry cloth.
-
After each wet use, clean the appliance thoroughly with water to
-
ensure optimum performance.
Cleaning the epilating head and attachments
1
Switch off the appliance.
2
Remove the attachment from the epilating head.
3
Push the epilating head to the right (1) and remove it from the
appliance (2).
Note: Never try to detach the epilating discs from the epilating head.
4
Remove loose hairs with the cleaning brush.
Rinse all parts under the tap and shake off excess water.
5
Note: Make sure all parts are completely dry before you reassemble the appliance.
Cleaning the shaving head and the trimming comb
1
Push the shaving head in the direction of the arrows on the back of
the appliance (1) and remove it (2).
2
Remove the shaving foil from the shaving head.
ENGLISH
11
Advertisement
Table of Contents
