Canon VB-R13VE H2 Manual page 12

 List of Factory Default Settings
The setting values for the factory default settings are changed as indicated below.
• IPv4
IPv4 Address Settings Method
• DNS
Set Name Server Address Automatically
• Administrator Account
Administrator Name
Password
• User Authority
Guest User Camera Control
• User Authority
Guest User Audio Distribution
• Camera Name
Camera Name (alphanumeric characters)
• Camera Settings
Focus
• Camera Settings
Day/Night
• Memory Card Operations
Overwrite videos
Note
Since cameras with the factory default settings are configured to obtain an IP address from the DHCP server, detect the camera by
Camera Management Tool using a DHCP environment or an IPv6 environment. If you configure the settings using other
environments, please refer to "Operation Guide" > "Setting up the network without a DHCP server".
 Setting Name Changes
Note
Setting names other than the following may also have been changed, depending on the model you are using.
The setting name of [Bit Rate Control] has been changed in [Basic] > [Video] > [H.264(1)] and [H.264(2)].
• [Use bit rate control] changed to [Use bit rate control (constant bit rate)]
• [Do not use bit rate control] changed to [Do not use bit rate control (variable bit rate)]
xii
Item
Manual
Disable
With setting values
Video distribution and
Camera control
Yes
Camera
Manual
Day Mode
Disable
Before Change
Auto (DHCP)
Use DHCP/DHCPv6
Without setting values
No access privileges
No
Model Name (Example) VB-M50B
Auto
Auto
Enable
After Change