Installation - Jensen MPR319 Installation & Owner's Manual

MPR319

INSTALLATION

Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Mounting the Head Unit:
Typical DIN mounting
Step 1:
Insert the mounting
sleeve into the
installation kit or
dashboard.
Step 2:
Bend multiple
mounting tabs around
the mounting sleeve
until the mounting
sleeve is secure.
Step 3:
Connect all wiring
harnesses and slide
the head unit into the
mounting sleeve until
it clicks into place.
Mounting the Head Unit:
ISO mounting
Using the existing
brackets or the brackets
supplied with the
installation kit, mount
the brackets to the sides
of the head unit with the
screws supplied with the
head unit.
2
Preparation
Single DIN
Single DIN
Dashboard or Installation Kit
Mounting Tabs
Single DIN
Dashboard or Installation Kit
Head Unit
Single DIN
Decorative
Bezel
New
Radio
Dashboard or
Installation Kit
Mounting Sleeve
Mounting Sleeve
Mounting Sleeve
Existing
Brackets