Automatic Rinse/Self-Cleaning Cycle - Gaggia NAVIGLIO HD8749/01 User Manual

2 Press the " " button to start the cycle. The machine starts the
automatic priming of the circuit by dispensing some water through the
Classic Milk Frother.
3 When the process is complete, the"
The machine is in the warm-up mode.

Automatic Rinse/Self-Cleaning Cycle

When warm-up is completed, the machine automatically performs a rinse/
self-cleaning cycle of the internal circuits with fresh water. This takes less
than a minute.
4
Place a container under the dispensing spout to catch the small
amount of dispensed water.
5 The " " and " " buttons fl ash during the entire process.
6 Wait for the cycle to fi nish automatically.
Note:
You can stop the dispensing process by pressing either the "
button.
7 When the above steps are complete, check that the "
" " buttons are lit.
ENGLISH
" and " " buttons will fl ash.
" or the "
", " ", "
13
"
" and