Volume Controls - VTech BLUEY JOTBOT Instruction Manual

Volume Controls

To adjust the sound volume, press
and to increase the volume.
NOTE: In cases where the arrow buttons are in use, such as
when in Code-to-Draw mode, the volume controls will
temporarily be unavailable.
FAQ
Q: What type of paper should I use?
A: JotBot works best on non-gloss paper, no smaller than A4 in size.
Make sure the paper is placed on a flat and level surface.
Q: What should I do if JotBot enters sleep mode?
A: When not in use for a period of time, JotBot will go to sleep
to save power. Slide the switch to the Off position, and then
slide it to either of the mode positions to wake JotBot up.
Q: What should I do if JotBot draws broken pictures?
A: JotBot may need new batteries or cleaning. Replace the
batteries with new ones. Check and make sure the pen holder
is not blocked. Check the wheels are free from obstruction and
that the metal ball underneath JotBot is not stiff and spins freely.
Calibrate JotBot if it still does not work.
Q: Can I use pens other than the pen bundled with JotBot?
A: Yes. JotBot is compatible with washable felt tip pens between
8 mm to 10 mm diameter of thickness.
Q: What should I do if the bundled pen's ink gets on my clothes or
furniture?
A: The ink of the bundled pen is washable. For clothes, use mild
soapy water to soak and rinse them. For other surfaces, use a
damp cloth to wipe and clean them.
to decrease the volume
19