Siemens SX67Z800BE Information For Use page 37

Basic setting
Eco forecast
emotionLight
Emotion Light 1
Emotion Light 2
Emotion Light 3
timeLight
Start programme
Tone volume
Button volume
1
Factory setting (may vary according to model)
Selection
on
1
off
off
1
On via main switch
On on opening door
Level 1
Level 2
Level 3
Level 4
1
Level 5
See selection on the
appliance.
1
on
off
1
on
off
1
Eco 50°C
Last selected pro-
gramme
Scale with multiple
levels.
Scale with multiple
levels
Description
Switch EcoCheck on or off.
When selecting the programme, the average wa-
ter consumption and energy consumption is
briefly shown on the display.
Switch the interior lighting of the appliance on or
off.
When the appliance door is opened, the interior
lighting switches off automatically after 10
minutes.
Set the brightness of the interior lighting.
Only available if "emotionLight" is switched on.
Tip: You can also set the brightness of the in-
terior lighting using the Home Connect app.
Note: If you have used the Home Connect app to
create your own colour, you cannot select "Emo-
tion Light 1".
Select the colour of the interior lighting.
Only available if "emotionLight" is switched on.
Tip: You can also set the colour of the interior
lighting using the Home Connect app.
Switch visual signalling of faults on or off.
If an error occurs on your appliance, the interior
lighting will flash.
Only available if "emotionLight" is switched on.
Switch "timeLight" on or off.
While the programme is running, status informa-
tion is projected onto the floor below the appli-
ance door, e.g. the remaining running time. If the
base panel is pulled forwards or if the appliance
is installed at eye level with the cabinet front fit-
ted flush, the display is not visible.
Set a default programme for when the appliance
is switched on.
→ "Programmes", Page 18
Set the signal volume at the end of the pro-
gramme.
Level 0 switches the signal tones off.
Set the button volume during operation.
Level 0 switches the button tones off.
Basic settings en
37