Ariston NIMBUS PLUS S NET Manual page 50

SAFETY REGULATIONS
CAUTION
This manual constitutes an integral and essential part of
the product. It must be kept with care and accompany the
product at all times, whether in case of transfer to a new
owner / user or use on a new application.
Read the information and warnings given in this manual in full;
they are essential to the safe installation, use and maintenance
of the product.
Do not use the product for any purpose other than that
specified in this manual. The manufacturer is not liable for
damage resulting from improper use of the product or failure
to install it as instructed herein.
All routine and extraordinary maintenance must be done
exclusively by qualified staff using solely original spare parts.
The manufacturer is not liable for damage resulting
Key to symbols:
Failure to comply with this warning implies the risk of perso-
nal injury, in some circumstances even fatal.
Failure to comply with this warning may result in serious da-
mage to property, plants or animals.
The manufacturer is not liable for damage resulting from im-
proper use of the product or failure to install it as instructed
herein.
Install the appliance on a solid basement which is not
subject to vibration.
Noisiness during operation.
When drilling holes in the wall for installation purpo-
ses, take care not to damage any electrical wiring or
existing piping.
Electrocution caused by contact with live wires.
Damage to existing installations.
Flooding caused by water leaking from damaged pipes.
Perform all electrical connections using wires which
have a suitable section.he electrical connection of the
product must be done following the instruction ma-
nual in the relative paragraph.
Fire caused by overheating due to electrical current passing
through undersized cables.
Protect all connection pipes and wires in order to pre-
vent them from being damaged.
Electrocution caused by contact with live wires.
Flooding caused by water leaking from damaged piping.
Make sure the installation site and any systems to
which the appliance must be connected comply with
the applicable norms in force.
Electrocution caused by contact with live wires which have
been installed incorrectly.
Damage to the appliance caused by improper operating
conditions.
50 / GB
Use suitable manual tools and equipment (make
sure in particular that the tool is not worn out and
that its handle is fi xed properly); use them correctly
and make sure they do not fall from a height. Repla-
ce them once you have fi nished using them.
Personal injury from the falling splinters or fragments, inha-
lation of dust, shocks, cuts, pricks and abrasions.
Damage to the appliance or surrounding objects caused by
falling splinters, knocks and incisions.
Use electrical equipment suitable for its intended use
(in particular, make sure that the power supply cable
and plug are intact and that the parts featuring rotary
or reciprocating motions are fastened correctly); use
this equipment correctly; do not obstruct passageways
with the power supply cable, make sure no equipment
could fall from a height. Disconnect it and replace it sa-
fely after use.
Personal injury caused by falling splinters or fragments, in-
halation of dust, knocks, cuts, puncture wounds, abrasions,
noise and vibration.
Damage to the appliance or surrounding objects caused by
falling splinters, knocks and incisions.
Make sure any portable ladders are positioned secu-
rely, that they are suitably strong and that the steps are
intact and not slippery and do not wobble when some-
one climbs them. Ensure someone provides supervi-
sion at all times.
Personal injury caused by falling from a height or cuts (ste-
pladders shutting accidentally).
Make sure any rolling ladders are positioned securely,
that they are suitably strong, that the steps are intact
and not slippery and that the ladders are fitted with
handrails on either side of the ladder and parapets on
the landing .
Personal injury caused by falling from a height.
During all work carried out at a certain height (generally
with a difference in height of more than two meters), make
sure that parapets are used to surround the work area or
that individual harnesses are used to prevent falls. The spa-
ce where any accidental fall may occur should be free from
dangerous obstacles, and any impact upon falling should
be cushioned by semi-rigid or deformable surfaces.
Personal injury caused by falling from a height.
Make sure the workplace has suitable hygiene and sa-
nitary conditions in terms of lighting, ventilation and
solidity of the structures.
Personal injury caused by knocks, stumbling etc.
Protect the appliance and all areas in the vicinity of the
work place using suitable material.
Damage to the appliance or surrounding objects caused by
falling splinters, knocks and incisions.
Handle the appliance with suitable protection and with
care.
Damage to the appliance or surrounding objects from
shocks, knocks, incisions and squashing.