Additional Safety For Mortising Machines - Grizzly G0645 Owner's Manual

Additional Safety for Mortising Machines

1. HAND PROTECTION. Do not place your
hands under an installed chisel at any
time or near the chisel while the spindle
is in motion. Chisels may become hot dur-
ing operation! Allow chisels to cool before
handling. Chisels are sharp! Always use
caution when handling, especially when
installing or removing.
2. USING CORRECT MATERIALS. Mortising
materials such as metals, plastics, and
glass can result in serious personal injury
and machine damage. Do not use the
machine for anything except mortising in
wood.
3. RESPIRATOR AND SAFETY GLASSES.
Dust and chips created from mortising and
may be ejected, becoming hazards to the
eyes and lungs. Always wear a respira-
tor and safety glasses while operating the
machine.
4. CHISEL COMPATIBILITY. Mortising bits
can fly out of chuck at the operator if not
properly secured, causing serious personal
injury. Make sure the mortising bit fits a
minimum of / " into the chuck.
1
2
Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.
-8-
5. ADJUSTMENTS. Hands may be seriously
injured if they come in contact with the
chisel and drill bit during operation. Do not
adjust the machine or workpiece while the
mortising machine is running. Wait for the
spindle to come to a complete stop and
unplug the machine before continuing.
6. INSPECTING MACHINE. Loose chisels
and bits can be ejected at the operator,
or the headstock can fall if not properly
secured, causing serious personal injury.
Inspect the machine for smooth head cast-
ing movement, loose drill bits/chisel hous-
ing, loose nuts/bolts and lock levers before
connecting the machine to power and oper-
ating. Correct any problems before use.
7. EXPERIENCING DIFFICULTIES. If at any
time you are experiencing difficulties per-
forming the intended operation, stop using
the machine! Contact Tech Support at
(570) 546-9663.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
G0645 Benchtop Mortising Machine