Set Eye-Fi Card Connection Mode
This camera supports wireless connection for Eye-Fi cards. Enable the Eye-Fi connection
by following the steps below:
1. Press the
to enter the menu.
2. Press the up/down button to select
enter the menu.
3. Press the up/down button to select [Eye-Fi] and press the
enter the menu.
4. Press the up/down buttons to select [On] or [Off] and press the
If the Eye-Fi card is not available in the camera, this feature is not displayed.
78
78
button, press the up/down button to select
and press the
button or right button to
and press the
button
button or right button to
button to confirm.