Cleaning And Maintenance - Saeco GranAroma SM6582 User Manual

English
14
2 Remove the water tank and open the service door (Fig. 26).
3 Press the PUSH handle (Fig. 27) and pull at the grip of the brew group to remove it from the
machine (Fig. 28).
When you remove the brew group from the machine, make sure to empty the drip tray and the
coffee grounds container.
Reinserting the brew group
Before you slide the brew group back into the machine, make sure it is in the correct position.
1 Check if the brew group is in the correct position. The arrow on the yellow cylinder on the side of
the brew group has to be aligned with the black arrow and N (Fig. 29).
- If they are not aligned, push down the lever until it is in contact with the base of the brew group
(Fig. 30).
2 Slide the brew group back into the machine along the guiding rails on the sides (Fig. 31) until it locks
into position with a click (Fig. 32). Do not press the PUSH button.
3 Close the service door and place back the water tank.

Cleaning and maintenance

Regular cleaning and maintenance keeps your machine in top condition and ensures good-tasting
coffee for a long time with a steady coffee flow.
Consult the table below for a detailed description on when and how to clean all detachable parts of
the machine. You can find more detailed information and video instructions on www.saeco.com/care.
See figure C for an overview of which parts can be cleaned in the dishwasher.
Detachable parts When to clean
Brew group
Milk system/internal
cappuccinatore
Weekly
Monthly
After every day of use
Weekly
How to clean
Remove the brew group from the machine
(see 'Removing and inserting the brew group').
Rinse it under the tap (see 'Cleaning the brew
group under the tap').
Clean the brew group with the Philips coffee
oil remover tablet (see 'Cleaning the brew
group with the coffee oil remover tablets').
Perform the 'HygieSteam' program in the
cleaning menu. Select 'HygieSteam' in the
cleaning menu and follow the instructions
on the screen. Wipe the outside of the metal
milk tube with a damp cloth before placing it
into the milk tube holder.
Remove and disassemble the internal
cappuccinatore (see 'Cleaning the internal
cappuccinatore under the tap'). Rinse all
parts under the tap with some washing-up
liquid.