Panasonic HC-V180 Owner's Manual page 65

[SHOOTING GUIDE]
Message is displayed when this unit is moved rapidly.
: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]
MENU
When "CAMERA PANNING IS TOO FAST." appears, move the unit slowly while recording.
≥ In the following cases, message will not appear:
j While pausing the recording (only when [DEMO MODE] is not set to [ON])
j When [LEVEL GAUGE] is set to [ON]
[WIND CUT]
This is for reducing the wind noise coming into the built-in microphones.
≥ Switch to Manual Mode.
: [RECORD SETUP] # [WIND CUT] # [ON]
MENU
≥ This function's default setting is [ON].
≥ When switching to Intelligent Auto Mode/Intelligent Auto Plus Mode, [WIND CUT] is set to [ON],
and the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
[MIC SETUP]
Recording setting of the built-in microphone can be adjusted.
≥ Set [REC FORMAT] to [AVCHD].
: [RECORD SETUP] # [MIC SETUP] # desired setting
MENU
[STEREO MIC]:
[ZOOM MIC]:
≥ [MIC SETUP] will become [STEREO MIC] when the [REC FORMAT] is set to [MP4/iFrame].
(l 47)
(l 61)
Sound from two directions is recorded in 2 ch by forward-facing
stereo microphones.
Sound is recorded with changing the directionality in conjunction
with the zoom operation. Sounds near the front of the unit are
recorded more clearly if you zoom in (close-up) and surrounding
sounds are recorded more realistically if you zoom out (wide angle).
- 65 -