Network - Philips BDL5530QL User Manual

BDL5530QL
Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
H monitors
1 2
6 7
11 12 13
16 17 18
21 22 23
Frame comp.
Choose to turn the frame compensation function on or off. If selected
{On}, the display will adjust the image to compensate for the width of
the display bezels in order to accurately display the image.
{On}
{Off}
NOTE: You need to enter factory mode to set up the compensation
width
Switch on delay
Adjust the power-on delaying time (in seconds) allows a sequential
powering-on for each display by their ID number when multiple displays
are connected.
3 4 5
8 9 10
14 15
19 20
24 25

5.1.4. Network

Picture
Sound
Tiling
Position
Network
Storage
General settings
Network settings
{Network configuration}: Choose how this display should assign
addresses to the network resources.
The user can choose {DHCP & Auto IP} (suggested) or {Static IP}.
Static IP Configuration
{Static IP} is chosen.Define {IP address}, {Netmask}, {Gateway}, {DNS1},
and {DNS2} for this display. If {Network settings}
Digital Media Renderer - DMR
Receive multimedia files from the connected device by your network.
Network name
In the multiple-display connection, you can rename each display for easy
identification.
Use the on-screen keyboard or the remote control keypad to enter the
name.
Clear Internet memory
Clear all the cookies, bookmarks, history list and text used for auto fill.
Notes:
• Before using import function of USB copying for AutoPlay, create a
new folder and name it "philips". Put all media files into the specific
folder for AutoPlay.
20
Network settings
Static IP Configuration
Digital Media Rendere...
Network name
Clear Internet memory