Table of Contents
Advertisement
RUGGEDCOM WIN7235
Installation Guide
• EN 60950-22
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
• EN 61850-3
Communication Networks and Systems for Power Utility Automation – Part 3: General Requirements
• EN 301 326-2 (v1.2.2)
Fixed Radio Systems – Multipoint Equipment and Antennas – Part 2: Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment
• EN 301 489-4 (v1.3.1)
Electromagnetic Compatibility and Radio Spectrum Matters (ERM) – Electromagnetic Compatibility (EMC)
Standard for Radio Equipment and Services – Part 4: Specific Conditions for Fixed Radio Links, Broadband Data
Transmission System Base Stations, Ancillary Equipment and Services
The device is marked with a CE marking and can be used throughout the European community.
A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd. For contact information, refer to
"Contacting
Siemens".
Section 5.1.4
TÜV Rheinland
This base station is certified by TÜV Rheinland to meet the requirements of the following standards:
• UL 60950-1:2007 R10.14
Information Technology Equipment – Safety – Part 1: General Requirements
• UL 60950-22:2007 R12.11
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
The base station is marked with a TÜV Rheinland marking and can be used throughout the European community.
A copy of the TÜV Rheinland Declaration of Conformity is available from Siemens Canada Ltd. For contact
information, refer to
Section 5.1.5
Other Approvals
This device meets the requirements of the following additional standards:
• IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
TÜV Rheinland
"Contacting
Siemens".
Chapter 5
Certification
35
Advertisement
Table of Contents
