1-3: Drumtrk Pattern (Drum Track Pattern); 1-4: Drumtrk Program (Drum Track Program); 1-5: X-Y Setup; 1-6: Controllers Setup - Korg EXB-RADIAS for M3 Owner's Manual

Table of Contents

PROG P1: Basic/DT/Ctrls 1–3: DrumTrk Pattern (Drum Track Pattern)

1–3: DrumTrk Pattern

(Drum Track Pattern)

Here you can select a drum track pattern and specify how it

will sound.

For details on the available parameters and menu

commands, please see "1–3: DrumTrk Pattern (DrumTrack

Pattern)" on page 28 of the M3 parameter guide.

1–4: DrumTrk Program

(Drum Track Program)

Here you can select the drum program that will be used by

the drum track.

For details on the available parameters and menu

commands, please see "1–4: DrumTrk Program (DrumTrack

Program)" on page 29 of the M3 parameter guide.

1–5: X–Y Setup

Here you can select the parameters that will be used

by X–Y control.

For details on the available parameters and menu

commands, please see "1–5: X–Y Setup" on page 31 of the

M3 parameter guide.

1–6: Controllers Setup

Here you can specify the SW1 and SW2 switch and 5–8

slider functions of the program when Control Assign

REALTIME CONTROL is selected.

For details on the available parameters and menu

commands, please see "1–6: Controllers Setup" on page 35

of the M3 parameter guide.

1–7: Pads 1–4 Setup,

1–8: Pads 5–8 Setup

There are eight velocity-sensitive trigger pads below the

display. These look like drum machine pads, and playing

drum sounds is certainly one use for them.

For details on the available parameters and menu

commands, please see "1–7: Pads 1–4 Setup, 1–8: Pads 5–8

Setup" on page 36 of the M3 parameter guide.

Table of Contents