Mode 1: Upright Vac - Shark NV355C Owner's Manual

Mode 1: Upright Vac

To reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or
converting modes.
WARNING: The On/Off switch is on the top of the portable Lift-Away
is OFF ("O" position) before plugging and unpluggin
Fig. 8
TO ASSEMBLE:
1 Place the floor nozzle on a level surfa
2 A
lign the tube of the floor nozzle with the tube on
the portable Lift-Away
you hear the two pieces click into place.
(Fig. 8)
When attaching the motorized floor brush, ensure
that the latching mechanism is fully locked in place
to ensure electrical connection has been made
3
Attach the end of the extension wand to the tube
on the back of the portable Lift-Away
until it clicks into place. (Fig. 9)
4 Sli de the accessory holder (a) positioned opposite
the upper cord wrap, over the extension wand.
Align the tab with the groove and push down.
(Fig. 10)
8 TOLL FREE: 1-800-798-7398
NV355C_26_IB_E_F_110621_2.indd 8
Fig. 9
ce.
canister and lower until
®
.
canister
®
canister. Always ensure the power
®
g.
Upper Cord
Storage Wrap
c
Fig. 10
Push the handle (b) onto the top of the extension
5
wand until you hear it click into place. (Fig. 10)
6 Insert the end of the stretch hose (c) into the
connector on the back of the portable Lift-
canister. (Fig. 10)
Away ®
7 St ore the dusting brush (d) and the crevice tool
(e) on the mounts of the accessory holder.
(Fig. 10)
b
d
a
e
11-06-21 3:38 PM