Association With Application; Registering The I-Option License; Preparation Flow; Enabling The I-Option Function - Konica Minolta bizhub C659 Quick Start Manual

4.1 Using advanced functions
In addition, this machine supports advanced functions such as the barcode font, unicode font, and OCR font.
d
Reference
For details, refer to the User's Guide CD.
4.1.2

Association with application

To use the My Panel or My Address function, you need to purchase My Panel Manager and enable the target
function in the application side.
For details on how to enable such a function, refer to the My Panel Manager User's Guide.
4.1.3

Registering the i-Option license

To add an optional function to this machine, you need to purchase i-Option and register its license.
Tips
-
Check that this machine can be connected to the Internet.
-
When enabling the i-Option function via the Internet, connect this machine to the License Management
Server (LMS) through the proxy server used for remote diagnosis. For details on configuring the proxy
server used for remote diagnosis, refer to the User's Guide CD.
-
i-Option LK-110 v2 includes the function licenses for i-Option LK-102 v3 and LK-105 v4. If you pur-
chase i-Option LK-110 v2, you do not need to purchase i-Option LK-102 v3 or LK-105 v4.
For details on how to purchase or install an optional unit, contact your service representative.

Preparation flow

The following describes a preparation flow to use advanced functions. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1
Enabling the i-Option function (Administrator)
% Enable the i-Option function on this machine. For details, refer to page 4-3.
% If you cannot enable the function above, proceed to steps 2 and 3.
2
Registering the i-Option license (Administrator)
% Register the license on a dedicated Web site. For details, refer to page 4-5.
3
Enabling the i-Option function using the license (Administrator)
% Enter the license code to enable the function. For details, refer to page 4-7.
4
Configuring each function (Administrator)
% Configure the required settings for each advanced function. For details, refer to page 4-8.
d
Reference
For details on the procedure, refer to the User's Guide CD.

Enabling the i-Option function

1
Prepare at hand the token certificate supplied with i-Option.
bizhub C759/C659, AccurioPrint C759
4
4-3