Tuning The Television Channels From Satellite (Dvb-S/S2) - Grundig 28 VLE 5401 WG Manual

Lcd tv with led backlight
Hide thumbs Also See for 28 VLE 5401 WG:
Table of Contents

Advertisement

settinGs
­-----------------------------------------------------------------------------------------------------------------------------------------
­ t uning­the­television­channels­
from­satellite­(DvB-s/s2)
You have two options for tuning digital satellite
channels.
A The easy installation,
w hich pre-configures all antenna settings for
the satellite channels on Astra 19.2° East.
B The advanced installation
c an be used if you wish to receive satellite
channels from various satellites. To do so,
you must make the antenna settings (Satel-
lite, LNB Power, LNB Type, DISEqC Mode,
LNB Selection) for the satellites chosen.
easy­installation
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
<
>
with »
« or »
«.
2 Select the line »Easy Installation« with »
or »
« and press »oK« to confirm.
Λ
– O ther menu options will be displayed,
the satellite Astra 19.2° East is preset.
3 Start the scan with »
– T he »Search results« menu appears, and
the scan for TV channels begins.
– D epending on the number of television
channels received, this can easily take a
few minutes.
– T he scan is complete as soon as the »PRO-
GRAM TABLE« appears.
note:
You can abort the scan by pressing »exit«.
7
« (green).

Advanced­installation
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
<
with »
« or »
2 Select the line »Advanced Installation« with
»
« or »
v
Λ
– T he menu appears.
Satellite
Transponder
LNB Type
LNB Power
DISEqC Mode
LNB Selection
«
v
Quality
Signal strength
3 Select the line »Satellite« with »
and press »oK« to confirm.
– T he »SELECT SATELLITE« menu appears.
Select the satellites with »
>
»
« and press »oK« to confirm.
note:
The setting in the line »Transponder« is not
7
required for this automatic scan.
4 Select the line »LNB Power« with »
»
«.
Λ
Depending on the type of LNB, set the LNB
power supply to »13/18 V« or »14/19 V«
<
with »
« or »
5 Select the line »LNB Type« with »
Select the type of LNB installed with »
>
or »
«.
>
«.
« and press »oK« to confirm.
INSTALLATION
ANTENNA SETTINGS
ASTRA 19.2°,E
11362 MHz H
Universal
Poor
Normal
Exit
Auto Tuning
Back
Manual Tuning
«, »
v
>
«.
enGlish
08.08.2012
15:46
Off
Off
Off
Good
« or »
«
v
Λ
<
«, »
« or
Λ
« or
v
« or »
«.
v
Λ
<
«
­ 1 5

Advertisement

Table of Contents
loading

Table of Contents