Log - Nokia RM-256 User Manual

When you select Reject
send a text message informing the caller that you cannot
answer the call. Select
set up this option and write a standard text message, see
'Call', p. 100.
Call waiting
You can answer a call while you have another call in
progress if you have activated
Settings > Phone >
To answer the waiting call, press the call key. The first call
is put on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Transfer. To end the active call, press the end key. To end
both calls, select Options

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press
Log > Recent calls. The device registers missed and
received calls only if the network supports these functions,
the device is switched on, and within the network service
area.
92
to reject an incoming call, you can
Options > Send text message. To
Call waiting in Tools
Call > Call waiting (network service).
Options
> End all calls.
, and select Tools >
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list.
To clear an individual event, open a register, scroll to the
event, and press
Call duration
>
To monitor the approximate duration of your incoming and
outgoing calls, press
duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
>
To clear call duration timers, select
timers. For this you need the lock code. See 'Phone and
SIM card', p. 96.
Packet data
To check the amount of data sent and received during
packet data connections, press
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.
Options > Clear recent
.
, and selectTools > Log
Options >
, and select
> Call
Clear
Tools >