Table of Contents
Advertisement
Before Operation
Displaying Disc Information On -screen
You can display various information about the disc
loaded on-screen.
Press DISPLAY to show various playback informa-
1 1
tion.
The displayed items differ depending on the disc
type or playing status.
You can select an item by pressing
2 2
change or select the setting by pressing
• Title (Track) – Current title (or track) number/ total
number of titles (or tracks).
• Chapter – Current chapter number/ total number of
chapters.
• Time – Elapsed playing time.
• Audio – Selected audio language or channel.
• Subtitle – Selected subtitle.
• Angle – Selected angle/ total number of angles.
• Sound – Selected sound mode.
Note
Note
If any button is not pressed for a few seconds, the on-
screen display disappears.
Initial Settings
By using the Setup menu, you can make various adjust-
ments to items such as picture and sound. You can also
set a language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
item, see the pages 13 to 16.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to the initial screen.
To go to the next level:
Press
on the remote control.
To go back to the previous level:
Press
on the remote control.
GENERAL OPERATION
Press SETUP. The Setup menu appears.
1 1
Use
/
2 2
to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
Use
/
/
and
3 3
and then press
/
.
Use
/
4 4
SELECT/ENTER to confirm your selection. Some
items require additional steps.
Press SETUP or PLAY to exit the Setup menu.
5 5
LANGUAGE
OSD
Select a language for the Setup menu and the on-
screen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track (disc
audio), subtitles, and the disc menu.
Original – Refers to the original language in which the
disc was recorded.
Other – To select another language, press numeric but-
tons and then SELECT/ENTER to enter the correspon-
ding 4-digit number according to the language code list
on the page 30. If you enter the wrong language code,
press CLEAR.
to select the desired option then press
to select the second desired option
to move to the third level.
to select the desired setting then press
13
Advertisement
Table of Contents
