Table of Contents
Advertisement
3
Select this unit in the list.
When the unit has been registered as a MusicCast-
enable device, the room name specified for the unit is
displayed in the list. Otherwise, "YMS-4080 XXXXX
Bluetooth" is displayed.
If a passkey (PIN) is required, enter the number "0000".
YMS-4080 xxxxx Bluetooth
When the connection between the Bluetooth device and
the unit is established, a completion message is
displayed on the Bluetooth device, and the
on the unit glows blue.
Glows (blue)
4
PIN 0 0 0 0
1
2
3
4
5
6
7
8
9
0
NOTE
▪ To terminate the Bluetooth connection, perform one of the following operations.
– Turn off the Bluetooth function on the Bluetooth device.
– Hold down BLUETOOTH for more than 3 seconds.
indicator
– Select an input source other than Bluetooth on the unit.
– Turn off the unit.
▪ If the Bluetooth connection is terminated when the unit's input is BLUETOOTH, the
▪ Adjust the volume level of the Bluetooth device as required.
▪ Perform Bluetooth connection with the Bluetooth device and unit within 10 m (33 ft)
of each other.
▪ See documentation supplied with your Bluetooth device for more information.
32
En
Play a song on the Bluetooth device.
The unit will begin playing audio from the Bluetooth
device.
indicator turns off and the unit enters the connection wait status.
Advertisement
Table of Contents
