Default Network Settings - Canon PRO-500 Series Online Manual

Default Network Settings

LAN Connection Defaults
Item
Change LAN
SSID
Communication mode
Wireless LAN security
IP address (IPv4)
IP address (IPv6)
Set printer name*
Enable/disable IPv6
Enable/disable WSD
Timeout setting
Enable/disable Bonjour
Service name
LPR protocol setting
PictBridge communication Enable
Wireless LAN DRX setting Enable
Wired LAN DRX setting
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
LAN settings (Item for administrator)
Direct Connection Defaults
Item
SSID (Identifier for direct connection) DIRECT-abXX-PRO-500series *1
Password
Wireless LAN security
Direct connection device name
Connection request confirmation
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is
specified when the printer is turned on for the first time.)
Default
Disable LAN
BJNPSETUP
Infrastructure
Disable
Auto setup
Auto setup
XXXXXXXXXXXX
Enable
Enable
1 minute
Enable
Canon PRO-500 series
Enable
Enable
Default
YYYYYYYYYY *2
WPA2-PSK (AES)
ZZZZZZ-PRO-500series *3
Displayed
187