Table of Contents
Advertisement
Outdoor unit installation
1. Install the outdoor part of the unit
on a flat surface to avoid excess
noise and vibration. A condenser
pad is recommended.
2. Direct the air vent toward an area
without obstacles.
3. Install the unit at the site where
it is exposed to as little wind as
possible, especially in areas where
it is frequently windy.
4. If the installation site is exposed to
heavy winds, such as in coastal
areas, place the unit along the
widest part of the wall or use
protective plates.
5. Be sure there is no obstacle which
blocks exhausting air, including
schrubs or bushes.
Settlement of outdoor unit. Anchor the
outdoor unit tightly and horizontally
on a concrete or flat mount with a
bolt and nut 2/5" or 5/16" diameter
(Purchased separately).
Capacity (BTU/h)
9000
12000
Outdoor unit installation
11
Outdoor unit dimension
30.7x21.3x9.8
31.8x21.9x12.2
Strong wind
Air
inlet
A (inch)
inch(WxHxD)
21.6
21.6
Air inlet
Air outlet
B (inch)
10.9
12.8
Advertisement
Table of Contents
