Table of Contents
Advertisement
Option
Network
settings
Wi-Fi
Current
settings
Connection
Paired
devices
Bluetooth
Send while
off
Restore default settings
* See "Operating the Text Input Keyboard" (A163) for information on how to enter
alphanumeric characters.
C
Bluetooth Communication Indicator on the Shooting Screen
Lights up while the camera is connected to a smart device via Bluetooth.
Flashes when the camera is waiting for the connection to a smart device to be re-
established. Also flashes when the Bluetooth connection is cut off while uploading images
(A206).
Using the Menu
The Network Menu
SSID*: Change the SSID. Set a 1- to 32-character
alphanumeric SSID.
Auth./encryp.: Select whether or not to encrypt the
communications between the camera and the connected
smart device.
Communications are not encrypted when Open is selected.
Password*: Set the password. Set an 8- to 36-character
alphanumeric password.
Channel: Select the channel used for the Wi-Fi connection.
If the communication quality is poor or the image upload
speed is extremely slow when using a Wi-Fi connection, try
changing the channel.
Subnet mask: Use the default setting (255.255.255.0)
under normal conditions.
DHCP server IP address: Use the default setting
(192.168.0.10) under normal conditions.
Display the current settings.
Select Disable to turn off Bluetooth communication.
Change the smart device to connect with, or delete the
connected smart device. Up to five smart devices can be
registered in the camera, but the camera can connect to
only one device at a time.
Set whether or not to allow the camera to communicate
with the smart device when the camera is off or in standby
mode (A24).
Restore all network menu settings to their default values.
162
Description
Advertisement
Table of Contents
