Inner
Tub Cap
5) Disassembly of Tub Cover and Pulsator
① Remove 8 screws and take off the tub cover.
② Remove the pulsator cap.
③ Remove the pulsator screw.
④ Remove the pulsator washer.
6) Assemble the service tool (38 mm wrench)
7) Remove the hub attachment nut. (38 mm)
● Hit the bar using the hammer.
Tub Cover
Pulsator Cap
Pulsator
Screw
Pulsator
● Disconnect hub nut and disassemble the inner tub.
25
Pulsator Cap
Pulsator
Shaft
Rotor Nut
Hub Attachment Nut
Hub Fixing Nut
Outer Tub
Inner Tub
Ball Balancer
Bearing Housing ASM
Rotor
Stator