Turn Your Phone On And Off - Samsung J320 User Manual

2. Plug the USB cable into the USB charger/accessory port on the bottom of the phone.
3. Plug the other end of the USB cable into the charging head, and then plug the charging head into
an electrical outlet to charge your battery. Fully charging a battery may take several hours.
Note: Your phone's battery should have enough charge to turn the phone on and find a signal, run the
setup application, set up voicemail, and make a call. You should fully charge the battery as soon as
possible.
Caution: Use only Samsung-approved charging devices and batteries. Samsung accessories are
designed to maximize battery life. Using other accessories may invalidate your warranty and may cause
damage.
Caution: Failure to unplug the wall charger before you remove the battery may cause damage to the
device.
4. Press and hold the Power/Lock key to turn the phone on.

If your phone is activated, it will turn on, search for network service, and begin the setup
application.
5. If your phone is not yet activated, see

Turn Your Phone On and Off

The instructions below explain how to turn your phone on and off.
Get Started
Activation and Service for more information.
6