Lenovo YOGA BOOK Hardware Maintenance Manual
Figure 1. Removal steps of Keyboard assembly (continued)
Remove the black Mylar. Use tweezers to disconnect the Keyboard assembly and
the main board connected to the FPC interface. Gently pull the FPC, so the main
board and the Keyboard assembly are completely separated.
Note:
1. The power key's FPC can be easily broken in disassembly.
2. When open, the right side of the motor and the EMR are bonded together. Be careful
not to break the motor's lead wire.
3. The Keyboard assembly's FPC connector is located on the top left side. Remember that
slow disassembly is required so as not to damage the FPC.
28