How To Adjust A Shelf Position And Replace A Lamp - Turbo Air TGM-5R-N Series Installation And Operation Manual

HOW TO ADJUST A SHELF POSITION AND REPLACE A LAMP

(TGM-11RV-N#, TGM-14RV-N#, TGM-22RV*-N#)
MAIN TERMINAL
LAMP
CONNECTOR
LAMP BASE
HOLDING BOLT
LAMP SOCKET
(ONIY LAMP)
LED OR LAMP
LAMP SOCKET
(ONIY LAMP)
LAMP BASE
HOLDING BOLT
Please turn off the power before
positioning the shelves and
installing the lamp.
- CAUTION: Avoid electric
shock.
LAMP BASE HOLDER
LAMP BASE
LAMP BASE HOLDER
15
Turbo air
Disconnect the lamp connecter from the
main terminal.
- When disconnecting the lamp connector,
hold on to the connector. Do not pull by
holding on to the wire.
Detach the lamp base holder from the
lamp base.
After the work is done up to this
stage, shelves can be adjusted into a
new position.
Separate the lamp from the lamp
socket, and replace with the new
lamp.