Panasonic SA-AK640GCP Service Manual page 20

SA-AK640GCP
Error Code Diagnosis Contents Description of error
SRVC_TRV To unlock the
traverse unit for
service
RSET Cam gear jam/close
sensor faulty
CRS1 Error Code display
1. The errors that occured in CRS1 Mechanism can be recalled and displayed, in the order of the occurence under self-diagnostic
(Refer to Section 9.1 for procedures to enter this mode.
· Only the first 5 errors will be memorized (in backup memory). The subsequence error shall be ignored and not memorize.
For system with EEPROM as memory backup,memory space in EEPROM is neccesary.
2. To display all error code memorized
In CRS1 Self-Diagnostic mode, press [SINGLE CHANGE] to display subsequence error code.
It shall repeat after reaching error no. 5.
e.g.:
[1 _ _ _ _ I H M S] → [SINGLE CHANGE]
[2 _ _ _ _ I T O P] → [SINGLE CHANGE]
[3 _ _ _ _ H O M E] → [SINGLE CHANGE]
[4 _ _ _ _ L O A D] → [SINGLE CHANGE]
[5 _ _ _ _ _ U D D] → [SINGLE CHANGE]
3. To clear the error code memory
In CRS1 Self-Diagnostic mode, long press [SINGLE CHANGE] key (2s or more)
1. All trays set to
"STOCK" position
2. Mechanism set to
tray 5
3. Cam gear set to
"HOME" position
During tray re-open, the
cam gear will rotate in
the opposite direction to
reset the cam
gearposition. When it
fails, the error code will
appear.
Automatic FL Display
20
Remarks
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.