9. Reinstall all removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
Water cooling system
Prerequisite
Before you start, read Appendix A "Important safety information" on page 73 and print the following
instructions.
The water cooling system might be very hot. Before you open the computer cover, turn off the computer and
wait several minutes until the computer is cool.
Note: The images provided are for reference only. The water cooling system provided with your computer
may differ in appearance.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 26.
2. Remove the left side cover. See "Left side cover" on page 27.
3. Remove the power cables from the motherboard.
4. Remove the controller cables from the RGB board.
5. Unscrew the pump mounting screws.
Note: Carefully remove the screws from the system board to avoid any possible damage to the system
board. The screws cannot be removed from the pump.
6. Unscrew the fan mounting screws.
52
User Guide